Blind Spot Angles Morts Motorhome Warning Sticker/Static Cling/Magnetic
Made with Laminated Sign Vinyl with a Permanent Adhesive.
We also have an Optional Static Cling and Magnetic version. The Static cling version (re-useable) will stick to the flat sides of motorhomes (unriven surfaces), use water and squegee into place - removable without residue. One of our customers kindly tested and drove 2250 miles without issue.
This French Blind spot Sticker also known as Angles Morts Stickers is mandatory in France from the 1st of January 2021. From this date, all buses, coaches and motorhomes above 3.5 tonnes are required to display these stickers in urban areas. The new regulation is an official traffic rule that will be included in the French highway code under the heading R 313-32-1 . Failure to comply with this traffic rule will be punished with a class 4 fine. .
17cm Wide x 25cm High
For placement of stickers, please see the image
Need A Different Size or Custom Design Sticker? Please contact us with your requirements
Made with Laminated Signs Vinyl with a Permanent Adhesive. We also have an Optional Matte Removable Unlaminated Version. This French Blind spot Sticker also known as Angles Morts Stickers is mandatory in France from the 1st of January 2021. From this date, all buses, coaches and motorhomes above 3.5 tonnes are required to display these stickers in urban areas. The new regulation is an official traffic rule that will be included in the French highway code under the heading R 313-32-1 . Failure to comply with this traffic rule will be punished with a class 4 fine.
17cm Wide x 25cm High
For placement of stickers, please see the image
It is important the stickers are applied in the correct areas on the vehicle. Failure to place the sticker in the correct area could result in a fine.
On coaches, buses and motorhomes it is mandatory to apply the stickers on both sides and the rear of the vehicle. The sticker on the rear of the vehicle must be placed on the right hand side between 0.9 and 1.5 meters from the ground. On both sides, the stickers must be applied at the front (also at a height between 0.9 and 1.5 meters from the ground).
| Condition | New |
|---|---|
| Manufacturer | Vinyl Cut Graphics |
| Extended Description | We specialise in making REPRODUCTION/
Professional Grade - Comes sandwiched between a backing sheet and an application tape, Full fitting instructions will be provided, Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material, Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. |
